You have no items in your shopping basket.

£12.49

£14.99 inc. VAT

Serial OLED Module (8x2)

AXE131Y

Quick Overview

Once you have seen an OLED display in use you will never want to use an LCD again!

Much brighter display, much better viewing angle and lower current consumption means that OLEDs are set to become the new LCDs! This is a new 8x2 version of our ever popular 16x2 kit - smaller display but easier to fit into those smaller projects!


Be the first to review this product

Serial OLED Module (8x2)

Once you have seen an OLED display in use you will never want to use an LCD again!

Much brighter display, much better viewing angle and lower current consumption than backlit LCDs means that OLEDs are set to become the new LCDs!

This budget serial OLED kit includes a 8x2 OLED (yellow on black) display together with a small 'serial interface' PCB fitted with a PICAXE-18M2 chip.

The on-board PICAXE-18M2 chip is provided pre-programmed with the open-source AXE131 firmware, which allows this 18M2 chip to act as a 'slave' serial driver for the OLED display. This allows your main project to display text on the serial OLED via simple serout commands, such as -

serout B.7, N2400, ("Hello")

The AXE133 firmware can be accessed by using File, Open Samples in the Programming Editor and selecting the "AXE133 Serial OLED.bas" file and can also be downloaded from here.

Self assembly kit including 8x2 OLED display, 18M2, PCB and all components - requires simple soldering



Recommended Products


<